27
4 Getting in and out of the wheelchair
Important information when side transferring in and out of the wheelchair
In order to side transfer it is necessary for the armrest to either be raised or removed completely
depending on the model. A skirtguard can be installed as an option in connection with the
parallel sliding armrest. This is attached in the same way as the standard armrest and must also
be removed when transferring.
4.1 Remove the standard armrest in order to side transfer
Removing the armrest:
• Disconnect the cable (1) from the remote.
• Disengage the release handle (2).
• Pull the side part out of the holder.
To Next Page
Loading...
