68
8.5.2 Adjusting the depth of the tray / removing the tray
• Loosen the wing-screw (1).
• Adjust the table to the desired depth (or remove it entirely).
• Re-tighten the screw.
8.5.3 Swinging the tray away to the side
CAUTION! Risk of injury! When the tray is raised it does not lock in place in this position!
• Do not tilt the tray up and leave it leaning in this position.
• Never attempt to drive with the tray tilted up.
• Always lower the tray in a controlled manner.
The tray can be swivelled upwards and pushed to the side as
illustrated to enable getting on and off.
To Next Page
Loading...
