To Next PageTo Next Page
Need help?Do you have a question about the Invertek OPTIDRIVE Coolvert and is the answer not in the manual?
Manufacturer's statement of compliance with safety and EMC directives.
Details the STO safety function and its compliance standards.
Information on EMC standards and compliance for Optidrives.
Critical warnings regarding electrical hazards, installation, and operation.
Explains how to identify the specific drive model using its part number.
Lists and describes optional accessories like mounting kits and filters.
Details optional accessories for connectivity and diagnostics.
Guidelines for physical mounting, enclosure requirements.
Specifies physical dimensions and required ventilation clearances.
Instructions for connecting incoming power and motor.
Requirements for proper safety grounding of the drive.
Recommendations for achieving EMC compliance during installation.
Detailed wiring instructions for the STO safety function.
Steps for basic checks, setting motor parameters, and limits.
Explains different control modes and multi-step start-up sequences.
Details Modbus RTU connections, wiring, and telegram structure.
Lists parameters and their corresponding Modbus registers.
Lists fault codes, descriptions, and suggested remedies for drive faults.
Explains the meaning of drive status indicated by LEDs.
Overview of input/output ratings, ambient conditions, and environmental protection.
Detailed product ratings and de-rating requirements.
Specific requirements and considerations for UL approved installations.
Table showing electrical frequency, RPM, and RPS for different motor pole counts.
Manufacturer's statement of compliance with safety and EMC directives.
Details the STO safety function and its compliance standards.
Information on EMC standards and compliance for Optidrives.
Critical warnings regarding electrical hazards, installation, and operation.
Explains how to identify the specific drive model using its part number.
Lists and describes optional accessories like mounting kits and filters.
Details optional accessories for connectivity and diagnostics.
Guidelines for physical mounting, enclosure requirements.
Specifies physical dimensions and required ventilation clearances.
Instructions for connecting incoming power and motor.
Requirements for proper safety grounding of the drive.
Recommendations for achieving EMC compliance during installation.
Detailed wiring instructions for the STO safety function.
Steps for basic checks, setting motor parameters, and limits.
Explains different control modes and multi-step start-up sequences.
Details Modbus RTU connections, wiring, and telegram structure.
Lists parameters and their corresponding Modbus registers.
Lists fault codes, descriptions, and suggested remedies for drive faults.
Explains the meaning of drive status indicated by LEDs.
Overview of input/output ratings, ambient conditions, and environmental protection.
Detailed product ratings and de-rating requirements.
Specific requirements and considerations for UL approved installations.
Table showing electrical frequency, RPM, and RPS for different motor pole counts.
General| Overload Capacity | 150% for 60 seconds |
|---|---|
| Enclosure | IP20 |
| Protection Rating | IP20 |
| Cooling Method | Fan Cooled |
| Output Voltage | 0 - Input Voltage |
| Control Mode | Sensorless Vector Control |
| Operating Temperature | -10°C to 50°C |
| Communication Options | Modbus RTU |
