6 Networking Management
6.1 Supported Networks and Encryptions
The InvizBoz Go will only be able to scan and connect to 2.4GHz Wi-Fi networks (5GHz networks are not
supported).
The InvizBox Go will always choose psk-mixed and ccmp when setting up its hotspot.
6.2 Storing and Reconnecting to Networks
Each time the user will select a network in the Choose Network Page, the SSID and passsword (if any) will
be stored on the InvizBox Go.
When not connected, the InvizBox Go will regularly scan for available networks (except if there was recent
activity in the UI in order not to break connectivity). If during its scanning, it encounters a known SSID, it
will attempt to reconnect to it using the stored credentials.
7 Troubleshooting/Support
See http://invizbox.com/support for answers to FAQs and to log a support ticket if you have an issue which
is not covered by the technotes there.
Page 24 Section 6 Networking Management
To Previous Page
Loading...
Need help?
General
