INVT BD Series User Manual

1 Notes on this Manual
1. Scope of Validity
This manual is an integral part of BD-Hybrid, It describes the
assembly, installation, commissioning, maintenance and failure of the
product. Please read it carefully before operating.
Naming rules
For example,BD4K6TL-RL1:
" " " "4K6、 5K means output power 4.6kw or 5kw .
" " " "L means 48V Battery Voltage .
"1、 3" means "Output single-phase (1) or three-phase (3).
Store this manual where it will be accessible at all times.
1.2 Target Group
This manual is for qualified electricians. The tasks described in this
manual only can be performed by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information
appear in this document as described below:
Notes on this Manual Contents
Danger！
"Danger" indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Note！
"Note" provides tips that are valuable for the optimal operation of
our product.
Warning!
"Warning" indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Caution！
"Caution" indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
BD3KTL-RL1
BD3K6TL-RL1
BD4KTL-RL1
BD4K6TL-RL1
BD5KTL-RL1 BD6KTL-RL1
7 Setting
40
1. Control Panel
40
2. Instructions for LED Indicator 41
3. Instructions for the use of three modes
41
8 LCD Operation
44
1. LCD Interface
44
2. Setting
49
9 Fault diagnosis and solutions 67
5. Meter Connection 32
6. DRM Connection 34
7. WiFi Connection(optional) 36
8. RF Connection(optional) 37
9. Inverter Manipulation 38
02
03

INVT BD Series Specifications

General

Brand	INVT
Model	BD Series
Category	Inverter
Language	English