EasyManua.ls Logo

INVT BD Series

INVT BD Series
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting Setting
Grid-connected power
Interface
Description
-GRID PERCENT-
INPUT: 100%
Value range
(0~100)
Press Up/Down button to adjust the input
figure;
Press Enter button to confirm or Esc
button to cancel the input and return to
operation parameters interface;
The input value should range between 0 and
100.
Discharge power
Interface
Description
-DISC PERCENT-
INPUT: 050%
Value range
(0~100)
Press Up/Down button to adjust the input
figure;
Press Enter button to confirm or Esc
button to cancel the input and return to
operation interface;
The input value should range between 0 and
100.
VAC-MIN
Interface
Description
-GRID VOLT LOW-
INPUT: UNIT: V
Value range
(176~270V)
Grid Low Voltage Protection Point .
Press Up/Down to adjust the input
figure; Press Enter to confirm the
input.
Press ESC button to cancel the input and
return to operation parameters interface;
The value should range between 176V and
270,
which varies with dierent standards.
VAC-MAX
FAC-MIN
Interface
Description
-GRID VOLT
HIGH- INPUT:
UNIT: V
Value range
(240~280V)
Grid Over Voltage Protection Point.
Press Up/Down to adjust the input
figure; Press Enter to confirm the
input.
Press Esc to cancel the input and
return to operation parameters interface;
The value should range between 240V and 280V,
which varies with dierent standards.
FAC-MAX
Interface
Description
-GRID FREQ
LOW- INPUT:
Grid Low Frequency Protection Point
Press Up/Down to adjust the input figure;
UNIT: Hz
Press Enter to confirm the input.
Press Esc to cancel the input and return to
operation parameters interface;
Value range
(45~49.8)
The value ranges between 45 and 49.8,which
varies with dierent standards.
Interface
Description
-GRID FREQ HIGH-
INPUT: 52.0
UNIT: Hz
Value range
(50.2~55V)
Grid Over Frequency Protection Point.
Press Up/Down to adjust the input
number; Press Enter to confirm the
input.
Press ESC to cancel the input and
return to operational parameters
interface;
The value ranges between 50.2 and 55, which
varies with dierent standards.
58 59

Related product manuals