INVT CHV160A Series - Page 143

C.TY TNHH TỰ ĐỘNG HÓA VIỆT TRUNG 02413.281.181-
0989.984.666
Website:www.viet-trung.com.vn Đ/c:194-Nguyễn Trãi-Võ Cường-
TP.Bắc Ninh
SW FREQ
Setting
Range
Factory
Setting
P8.26
MANUAL
0~P0.07 0~P0.07 50.00Hz
When use manual soft start, the parameter sets the running frequency of inverter before
switching to grid-frequency pump.
Function
Code
Name Description
W lEVEL SI
Setting
Range
Factory
Setting
P8.27
INPUT
0~2 0~2 0
The parameter is set to whether control level of inlet pool or not.
0: No input.
1: Input by digital input termi
The level control signal is switch value.
2: Input by analog input terminal
Level signal input channel is selected by P8.28, and level limit is confirmed by