INVT Goodrive350-19 Series User Manual

Goodrive350-19 series VFD Function parameter list
- 207 -
Function
code
Name
Description
Default
value
Modify
P00.18
Function
parameter
restoration
0: No operation
1: Restore to default value
2: Clear fault history
3: Lock keypad parameters
Note: After the selected function operations are
done, this function code will be restored to 0
automatically. Restoration to default value will
clear the user password, this function should be
used with caution.
0
◎
7.2.2 P01 Start/stop control
Function
code
Name
Description
Default
value
Modify
P01.00
Running mode of
start
0: Direct start
1: Start after DC brake
2: Start after speed-tracking 1
3: Start after speed-tracking 2
Note: It can be modified only after P11.26 is 1
indicating special functions are enabled.
0
◎
P01.01
Starting frequency
of direct start
Starting frequency of direct startup is the initial
frequency when the VFD starts. See P01.02 (hold
time of starting frequency) for details.
Setting range: 0.00–50.00Hz
0.50Hz
◎
P01.02
Hold time of
starting frequency
Output frequency
fmax
t1
T
F1 set by P01.01
f1
T1 set by P01.02
A proper starting frequency can increase the
torque during startup. Within the hold time of
0.0s
◎

INVT Goodrive350-19 Series Specifications

General

Brand	INVT
Model	Goodrive350-19 Series
Category	DC Drives
Language	English