36
LBK System Series| Instruction manual v1.2 SET 2021 |SAF-UM-LBKBus-en-v1.2|© 2020-2021 Inxpect SpA
4. Functioning principles
4.4.2 Safety working modes
Via the Inxpect Safety application, you can select which safety working mode each sensor will employ for each of
its detection fields:
l Both (default):
o
the sensor performs the access detection function when it is in normal operation (No alarm status)
o
the sensor performs the restart prevention function when it is in alarm status (Alarm status)
l Always access detection:
o
the sensor always performs the access detection function (No alarm status + Alarm status)
l Always restart prevention:
o
the sensor always performs the restart prevention function (No alarm status + Alarm status)
Inside the field of view of each sensor you can set up to two detection fields:
l Detection field 1, e.g. used as alarm area
l Detection field 2, e.g. used as warning area
To Next Page
Loading...
Need help?
General
