11
Figure 10. Cable/Ports connection of a CEM40-NUC
DC OUTX3：DC outlets，total current 5A, 2.1/5.5 mm plug, powered by cable management
input
GUIDE：Guiding port, support ST-4 guiding device/camera
Suggested Intel NUC
Those NUC with thickness less than 38mm with be fit onto the mount without interference with the
mount body, such as Intel Frost Canyon or Tiger Canyon with “Slim” K chassis. Please double check your
NUC’s mounting holes.
2.3.5. Pass-through Hole
There is a hole on dovetail saddle that allows a user to run his own cables down through the mount
to the bottom of the DEC axle.
Figure 11. Openings for custom cable management
To Next Page
Loading...
