iPECS LDP-9030D - Intercom Talk, CO Dialing, and Busy Lines

9. Intercom Talk
TRANS
:
Press to transfer an incoming call to another
Basic Function
CONNECT TO 104
TRANS
:
Press
to
transfer
an
incoming
call
to
another
station.
CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone,
or headset microphone. Press the [SPEAK]
button to re- activate microphone.
ACNR : Press to set automatic called number redial.
FLASH
: Press to disconnect the line and re
seize
CONNECT
TO
104
12 OCT 09 12:00 pm
TRANS CONF MUTE
CONNECT TO 104
10. CO Dialing
The following CO access codes ‘9’, individual CO access code can be changed by Admin
FLASH
:
Press
to
disconnect
the
line
and
re
-
seize
.
PRIVACY : Press to use privacy mode.
12 OCT 09 12:00 pm
ACNR FLASH PRIVACY
LINE 08 12:00 pm
FLASH
Press programmed flexible button for CO.
(CO can be accessed by dialing CO access code 9 or
individual CO access code)
Dial telephone number
10.1 Manual Dialing
Programming 114 depending on the user’s needs.
Dial
telephone
number
.
10.2 Speed Dialing
Press [SPEED] button.
Press SEARCH to search speed dial by name
SPD_NO LAST(*) SAVE(#)
BACK SEARCH ADD
Dial number to seach name
EDIT : Press EDIT to edit speed bin
ERASE : Press ERASE to delete speed bin
>ABC : 9123456789
[SEARCH] :
EDIT ERASE
11. CO Line Busy
BACK: Press BACK to go to privious menu
SEND : Press SEND to make a call
EXIT : Press EXIT to exit Speed Menu
>ABC : 9123456789
[SEARCH] :
 BACK SEND EXIT
FLASH : If you wish to terminate a call and make
another call, press [FLASH] to re-seize dial
tone.
13
BUSY
FLASH