LIP-9000 Series User Guide - ST 7
Headset button: When using a headset, this button toggles the
headset state. When the headset is active, the button LED
illuminates red.
Hold (Save) button: Use to place a call on Hold. Also, use to
access a held call. In menu mode, it saves the user input.
Mute button: Toggles audio from the microphone to the connected
party On and Off.
10. Navigation key
Left: In LIP-9020, 30, and 40 models, use to select the previous
group of softkeys when ◄ appears in the bottom-left of the LCD. In
LIP-9010, use to go to previous step or select ‘no’ when user has to
choose ‘yes’ or ‘no’.
Right: In LIP-9020, 30and 40 models, use to select the next group of
softkeys when ► appears in the bottom-right of the LCD. In LIP-
9010, use to activate Call Log function in standby mode.
Up: Scrolls through the phone’s menu options upward.
Down: Scrolls through the phone’s menu options downward.
11. OK Key: Selects the highlighted choice when navigates through a menu.
12. Softkeys: Softkeys are interactive, changing function based on the IP
Phone status of LIP-9020, 30, and 40. LIP-9010 does not support.
To Next Page
Loading...
