IPitomy IP290 - SIP Account Settings; Creating SIP Accounts; Disabling SIP Accounts

www.ipitomy.com
IPitomy Communications
3.4 SIP Account Settings
The IP290 IP phone makes calls based on SIP accounts, It can support single account or multi-
accounts. Each account can be configured to the different SIP server.
If you want to…
Then...
Create an SIP account
--1) Select “System setting” > “Advanced setting”；
--2) Enter the password required (The default is none) ；
--3) Select “SIP” > “Account SIP”；
--4) Select one of the account you want to setting, you can configure
the following parameters
-Enable account*: Select Enable
-Number of lines: Default is 2
-Description: Description of this account
-Display Name: The name displayed on the screen
-Authentication user: the Authenticated users are matched with
the SIP server.(The default With the same account)
-Account*: The account matches with the SIP server. (extension
number)
-User pass word*: The user password matches with the SIP server
-SIP Server*: The primary SIP server, all calls through this server
-Out Bound Server: The out bound SIP server
-STUN Type: Enable/Disable STUN feature
-STUN: Input STUN URL
-Auto Answer: Enable/Disable this account auto answer feature
* Note: When you finish the setting, you can press Save to make it
work, and then you can see the status icon in the LCD idle.
The parameters with the * mark must be set.
Disable SIP account
--1) Select “System setting” > “Advanced setting”；
--2) Enter the password required (The default is empty) ；
--3) Select “SIP” > “Account sip”；