IPitomy IP290 - Hold and Resume Calls; Transferring Calls

www.ipitomy.com
IPitomy Communications
Talk to the transfer
recipient
before
--1) Press TRANSFER button or press XFER;
--2) Enter number;
Speakerphone
-or press Line button for the appropriate line,
-or press End
Hang up while using the
Headset
--Press Handset button, （Do not keep the headset mode) ,
-or press End (keep the headset mode)
Hang up one call, but
preserve another call on
the other line
--Press End,
-or refer to the above three methods
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines
would be on hold. As a result of that, you can switch to different calling lines on your phone.
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow-green and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the
call.
If you want to...
Then...
Put a call on hold -
-Press HOLD button,
-or press soft key
Hold a line and switch to
another line
--Press another Line button for the appropriate line
Resume a call on current
line
--Press Line button,
Release a call on different
line
--Select the line want to release hold, press the line, so recovery;