IPitomy IP290 - Language Setting Configuration; Message Checking and Creation; Time and Date Settings

www.ipitomy.com
IPitomy Communications
3.7.1 Language Setting
The IP290 IP Phone support Multi-Language setting, as below is an example.
3.7.2 Message
The IP290 has a vm message feature. It will display in the LCD when it has a New Message.
Create a Message
--1）Press OK or MENU button；
--2）Select "Messaging"
--3）Voice Message: Setting the Voice Message code in here.
Text Message: Write down the Text Message in here.
--4）Select Text Message> New Message.
--5） Input the receiver and write down message body, and then press
send to finish.
Message Inbox
--1）Select Message Inbox.
--2）Select which one you want to check.
--3）You can press Enter to read or press Del to delete.
3.7.3 Time & Date
SNTP -
-1）Press OK or MENU button；
--2）Press OK or MENU button> System Setting> Phone Setting> Time & Date>
Time and Date setting> SNTP
--3）SNTP
-Time Zone: Setting the time zone
-NTP Server 1：NTP server address 1
-NTP Server 2：NTP server address 2
-DayLight: Enable/Disable Day Light
SIP Server
--1）Press OK or MENU button
--2）Press OK or MENU button> System Setting> Phone Setting> Time & Date>
Time and Date setting>SIP Server
Switch the Language
between Chinese and
English
--1
） Press OK or MENU button> System Setting> Phone Setting>
Language
--2
）Here you can select
English\French\Italian\Polish\Protuguese\Runssian\Spanish\Turki
sh\Chinese
--3) After you finish select, press Save to make it work.