IS Technologies ULM-1000C - 2. LCD Display Modes

© IS Technologies Co., Ltd. PAGE 22 / 41
2. Display
2.1 LCD DISPLAY
ULM-1000C has two modes for measuring level. Measuring Mode is to ow
the measuring value in real time while it is operating. Programing Mode is to
calibrate the menus for individual applications.
The 4 digits is own in the LCD in the Measuring Mode. A Flaing “0” is
own when it is in fault condition (Lost Echo).
The program number is own in the LCD in the Programing Mode such as
P01, P02 etc.
The “menu” button is used to switch each mode.