© IS Technologies Co., Ltd. PAGE 34 / 41
4. Outputs Simulation Menu
When ULM-1000C is operated with other instruments, this menu can test to
examine by the output current from ULM-1000C. This is for the simulation.
[P17] Simulation
Put the range at your disposal. ULM-1000C sends out the output current for
the range. For example, if you put 6 meter (0.600), the output current is sent
out respond to 6 meter. If the range value is over than lowest level or highest
level, the error signal is sent out. When you move to the CURRENT
SIMULATION menu, the measuring process is stopped and the current output
becomes initialized to 0.
To Next Page
Loading...
Need help?
General