© IS Technologies Co., Ltd. PAGE 24 / 41
2.4 Programing Mode
This mode is used to set up the ULM-1000C or
change information already set, this is achieved
by using the 5 pu buttons located either side
of the display.
Entering a value for each of the menu options
that are relevant to your application provides all
the programming information.
The menu number is displayed with alphabet “P”. Up and Down Key makes
move to another menu.
3. Buttons
To access the Program Mode simply press the “Mode” button. Conrmation
that you have entered the Program Mode will be given by the Detect and
Mode (Level, Distance, Space) LED’s being extinguied, and the Soware
Version will also appear in the display. Each subsequent press of the Mode
button will advance you through the options, 01 to 05. To access other group
options, you have to press the Mode and Up/Down buttons.
• Access the Program Mode
• Move inside of each group option
• Move to other group option
• Change option value
• Return to Measuring Mode
• Return to Programing Mode
↑
↓
RUN
ESC
MENU
To Next Page
Loading...
Need help?
General