32
USE AND MAINTENANCE MANUAL
EN
428000467237 MILLENNIUM
13.2 CONDENSING UNIT
Turn off the product, wait a few hours until the equipment of the condensing unit has
reached a temperature near to ambient temperature.
Remove the front protective grille as indicated.
Clean the condensing unit using a suction brush.Clean the condenser with a soft bristle brush; make sure you do not
bend the condensing unit springs whilst cleaning it.
13.3 COLLECTION TANK FOR DEFROST WATER (IF PRESENT)
Clean based on use and as needed and in certain environmental conditions (e.g., high
humidity, low environmental temperature, presence of dust, etc.) in order to avoid the
incorrect and complete evaporation of the water and/or the presence of unpleasant odours.
Disinfect the tray with suitable products.
13.2.1 FILTER (IF PRESENT)
Some models can be supplied complete with a lter which must be cleaned regularly.
The lter is positioned as indicated below, except for model 12 placed on the right side of the technical compartment.
12
CLEANING
Vacuum dust from the lter.
Wash with running water and wait until it is completely dry
before reassembling it.
To Next Page
Loading...
