CHAPTER 1. FOR SAFE OPERATION
19
9.25. Do not change the engine governor settings or over-
speed the engine. Operating an engine at an exces-
sive speed can increase the risk of personal injury.
9.26. The grass catcher components are subject to wear
and damage, exposing you to moving parts or
thrown objects. Frequently check and replace them
with the manufacturer’s recommended parts when
necessary.
9.27. Be sure to reinstall the removed parts in place.
Never attempt to start the engine with any parts
removed.
9.28. Never attempt unauthorized modification of the front
mower as this could be very hazardous. Damaged
or worn parts should be replaced with ISEKI genu-
ine spare parts. Unauthorized parts may cause
breakdown of the front mower, accidents, and ISEKI
warranty to expire.
9.29. Keep all fasteners tight, especially those that hold
the cutting means(s).
9.30. Check that all safety devices are in place and oper-
ating properly.
Parts code of blade
Punched ID
SSM60 8654-306-006-10
8654 C
SSM72 8655-306-003-10
8655 C
To Next Page
Loading...
