SF310,370
46
WARNING:
Use the cruise control only;
• When the transmission range is shifted in
the LOW speed position (
). Never use it
in the HIGH speed position ( ). It is very
difficult to avoid hazards quickly if the trav-
elling speed is fixed at high rate.
• Operations in specious, flat areas with an
unobstructed view.
• After having become sufficiently familiar
with the way of releasing it.
Otherwise, unexpected accidents may occur,
which is very dangerous.
6. STOPPING
a. Release the HST pedal,1 or 2.
When mowing (Not using Auto throttle)
b. Shift the throttle lever,3, to the LOW speed ( ) posi-
tion to slow down the engine.
When travelling (using Auto throttle)
b. The throttle lever automatically returns to the LOW
speed position ( ).
c. Depress the master brake pedal,4, and lock the park-
ing brakes,5 or 6, securely.
CAUTION: Park the front mower on flat, level
ground and make sure that the parking brakes
are applied securely.
d. Shift the transmission range shift lever,7, to the Neutral
position (
N
).
CAUTION: Be sure to shift the transmission
range shift lever to the Neutral position (
N
)
after stopping the front mower, or if the engine
runs unexpectedly, the front mower may move
abruptly.
e. Shift the lift lever,8, to DOWN position ( ) to lower
the mower deck onto the ground.
CAUTION: When stopping the front mower,
lower the mower deck onto the ground without
fail to avoid accidents unexpectedly.
(1) HST forward travel pedal
(2) HST reverse travel pedal
(4) Master brake pedal
(5) Parking brake lever (Except G type)
(6) Parking brake lever (G type)
(7) Transmission range shift lever
(8) Lift lever
(3) Throttle lever