Iseki SRM48 - Maintenance of Safety Labels

13
CHAPTER 1. FOR SAFE OPERATION
(6) Maintenance label
Caution:
Shut off the engine and remove the starter key
before performing maintenance or repair work.
1-3. Maintenance of the safety labels
-The labels should always be clearly seen, that is,
nothing should obscure them.
-Wash the labels with soap water and wipe with a
soft cloth when they have become dirty.
-Order new labels from your dealers when some
of them are torn or lost.
-A new label should be placed in the same place
where the old one was located.
-Clean the place to enable the label to stick and
squeeze out all sir bubbles trapped under it when
sticking on a new label.
(3) Danger label
Caution:
Keep clear of the mower blades while the
engine is running.
(4) PTO label
Caution:
Keep clear of the PTO shaft while the engine is
running.
(5) Discharge label
Caution:
Keep a safe distance from the mower.