TM3217, 3247, 3267
70
FIG. 124:
To remove front grill; Pull the upper portion of grill to front
direction and lift up and remove the front grill.
Never fail to insert the projection under the grill into the
hole of battery base, and fix with the hook locating upper
left and right.
CAUTION: Take off the left and right connec-
tor of head lamp before removing the grill.
LUBRICATION DETAILS
Grease Fittings
Lubricate all grease fittings (refer to FIGS.117 & 118)
every 50 hours of operation using No.2 multipurpose
lithium base grease. Clean the grease gun and fittings
before and after greasing to prevent contamination from
dirt.
NOTE: When operating in muddy or extremely wet
conditions, daily lubrication of fittings is
recommended.
FIG. 123
FIG. 124
To Next Page
