iSMA CONTROLLI TP - Page 35

TP Software User Manual
www.ismacontrolli.com
DMP253en | 1st Issue rev. 0 | 04/2022
page 35 of 49
Modbus
Address
Decimal
Address
Hex Register Name Access Default
Value
Value
Range
Description
40207 206 0xCE BACKLIGHT_LCD_A
CTIVE
Read/
write
60 Contains a value of the
LCD display illumination
in the active mode
(expressed in %)
40208 207 0xCF BACKLIGHT_LCD_ID
LE
Read/
write
40 Contains a value of the
LCD display illumination
in the idle mode
(expressed in %)
40209 208 0xD0 BACKLIGHT_LCD_ST
ANDBY
Read/
write
0 Contains a value of the
LCD display illumination
in the standby mode
(expressed in %)
40210 209 0xD1 BACKLIGHT_LCD_TI
ME_TO_IDLE
Read/
write
10 Sets the time, after
which the LCD display
goes from the active
mode to idle (expressed
in seconds)
40211 210 0xD2 BACKLIGHT_LCD_TI
ME_TO_STANDBY
Read/
write
5 Sets the time, after
which the LCD display
goes from the idle mode
to standby (expressed in
seconds)
40212 211 0xD3 BACKLIGHT_KEYPA
D_ACTIVE
Read/
write
10 Contains a value of the
keypad illumination in
the active mode
(expressed in %)
40213 212 0xD4 BACKLIGHT_KEYPA
D_IDLE
Read/
write
40 Contains a value of the
keypad illumination in
the idle mode
(expressed in %)
40214 213 0xD5 BACKLIGHT_KEYPA
D_STANDBY
Read/
write
60 Contains a value of the
keypad illumination in
the standby mode
(expressed in %)
40215 214 0xD6 BACKLIGHT_KEYPA
D_TIME_TO_IDLE
Read/
write
10 Sets the time, after
which the keypad goes
from the active mode to
idle (expressed in
seconds)
40216 215 0xD7 BACKLIGHT_KEYPA
D_TIME_TO_STAND
BY
Read/
write
5 Sets the time, after
which the keypad goes
from the idle mode to
standby (expressed in
seconds)