STARTING AND CHARGING 6D3–3
Charging Circuit
Identification
The alternator identification plate is attached to the
alternator rear bracket. The ISUZU part number, the
manufacturer’s code number, and other important
information are stamped on the plate.
Refer to the identification plate together with the “Main
Data and Specifications” Tables and accompanying
charts in this Manual when requesting service
assistance from a qualified electrical repair shop.
If you are unable to locate the data applicable to your
engine, please contact ISUZU MOTORS LIMITED
through your machine supplier.
MITSUBISHI IDENTIFICATION PLATE
A: Isuzu part number
B: Manufacturer’s abbreviated name
C: System voltage output
D: Manufacturer’s lot No.
E: Bar code
To Next Page
Loading...
