6D3–12 STARTING AND CHARGING
Main Data and Specifictions
Isuzu Part No. 181100-4140
Mitsubishi code No. M008T60971
Rated voltage V 24
Rated output kW 5.0
Rating Sec 30
Direction of rotation Clockwise
(Viewed from the pinion side)
Terminal voltage (No load) V 23
Minimum current (No load) A 85
Starter motor minimum operating speed min
–1
3300
(No load)
Pinion gear
Modules 3
Number of teeth 11
Outside diameter mm (in) 48.9 (1.93)
Yoke outside diameter mm (in) 85 (3.35)
Brush length
Standard mm (in) 18 (0.71)
Limit mm (in) 11 (0.43)
Brush spring standard fitting load N (lb) 29 – 39 (6.6 – 8.8)
Commutator
Outside diameter
Standard mm (in) 32 (1.26)
Limit mm (in) 31.4 (1.23)
Depth of undercut mica
Standard mm (in) 0.5 (0.02)
Limit mm (in) 0.2 (0.008)
Pinion projection
Standard mm (in) 0.5 – 2.0 (0.0197 – 0.079)
To Next Page
Loading...
