This product is a mixer amplifier with Bluetooth radio, adopting by combination of high-performance
switching power supply and digital power amplifier, with 1U chassis design, high efficiency, light
weight & delicate appearance.
2. GENERAL DESCRIPTION
1. With 1U chassis design, internal combination of switching power supply and digital power amplifier,
higher efficiency, light weight and delicate appearance.
2. With function of MP3 module, can read MP3 files in USB flash disk, TF card. Configure MP3 remote
control; support power-off memory function, MIC recording function.
3. Support 1 channel EMC input, 2 channels AUX input, 4 channels MIC input.
4. Each input has independent volume adjustment with treble, bass, and volume control.
5. The equipment is equipped with level indication, overload and protection indicator, and has good
protection for short circuit, overload and overheat situation.
6. With mute function, microphone input, microphone is prior to line input; mute function, MIC1 is
prior to other audio inputs, EMC takes precedence over all audio inputs.
7. Channel priority function: EMC>MIC1>MIC2/MIC3/MIC4/AUX1/AUX2/MP3.
8. Adopt advanced and high-efficiency power amplify circuit, the speaker output is 100V or 4 ohms;
rated output power is 60W, 120W, 240W, 350W, 500W & 650W.
9. Input AC power, power supply 120W, 180W, 300W, 500W , 650W & 850W.
10. It is forced to air-cool from front to the rear, and it rotates at a constant speed when starting up.
It speeds up as the temperature rises and can work for a long time.
5
3. FEATURES
To Next Page
Loading...
Need help?
General
