ITech IT6952A - System:interface

System Commands
Copyright ©ITECH Electronic Co., Ltd. 19
Parameter:
0-30
Quest syntax:
SYSTem:COMMunicate:GPIB:RDEVice:ADDRess?
Returned parameter:
<NR1>
SYSTem:INTerface
This order is used to switch the communication interface.
Order syntax:
SYSTem:INTerface <GPIB|USB|RS232>
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com