User Guide
Inc\Vantage Software Upgrade Program\”. Vantage Software Upgrade Program begins to send a
file to the processor. This process may take several minutes.
Vantage Software Upgrade progress bar
j. The progress bar shows what percentage of the file has been sent.
k. You may see one, two or three progress bars appear during the VSU process. The firmware on
the Edge2 processor has three parts to it, boot loader, FPGA and application. Depending on what
version of firmware you start with you may need all three areas to be upgraded. After the files
are sent they are burned to flash.
To Next Page
Loading...
