4
Installing the OpenWay Riva 500W ERT Pit
Module
Install the pit module using one of the following methods. (For mounting option accessories, see
Pit module mounting accessories.)
Pit module mounting options
Through-lid The pit module mounts in lids with hole sizes from
1-3/4 inches to 2-inches. Installation requires the
Pit mount kit.
Rod mount* The pit module mounts on a 1/2-inch outside
diameter rod. Installation requires the rod mount
adapter.
Wall mount* The pit module mounts to a wall or other vertical
surface. Installation requires the rod mount
adapter.
* Rod and wall mount installations require the Itron through-the-lid remote antenna.
Important! The OpenWay Riva 500W ERT pit module is shipped with a protective
cover over the connectors. The protective cover must be fully engaged over the
connectors until the module is installed to protect the module's connectors from
damage.
08 January 2020 815-0006-01 Itron, Inc. Page 22 of 48