8. Select the correct Index (volume per pulse) setting (Imperial, ¼ CF; Metric, 10 dm3).
9. Click Select Meter to advance to the next screen.
10. Connect the SNAP pulse prover cable end (Itron part number CFG-7100-100) to the J4 (1)
08 July 2020 815-0154-00 REV 000 Itron, Inc. Page 28 of 66
Intelis Gas Meter Proving and Setup Guide
4 Proving the Intelis Gas Meter Using the Honeywell SNAP Proving
System
To Next Page
Loading...
