ITRON Intelis Setup Guide

Proving the Intelis Gas Meter
1. Connect the Measurement Systems pulse prover cable (Itron part number CFG-7100-500)
to the port on the left side of the Measurement Systems prover.
Note: If your Measurement Systems prover does not look like the illustration, contact
Measurement Systems for an adapter cable to connect the Measurement Systems pulse
prover cable to your prover.
08 July 2020 815-0154-00 REV 000 Itron, Inc. Page 45 of 66
Intelis Gas Meter Proving and Setup Guide
5 Proving the Intelis Gas Meter Using the Measurement Systems
Proving System

ITRON Intelis Specifications

General

Brand	ITRON
Model	Intelis
Category	Measuring Instruments
Language	English