Temper the Meter by Exercising the Meter
1. Log on to the EEI prover application.
Note: Logging on to the EEI prover application requires maintenance level security.
2. Select Maintain > Sensor Maintenance.
3. Clamp the Intelis Gas Meter to the prover and turn on appropriate nozzles in the center
column of the Sensor Maintenance window to exercise the meter.
08 July 2020 815-0154-00 REV 000 Itron, Inc. Page 50 of 66
Intelis Gas Meter Proving and Setup Guide
6 îProving the Intelis Gas Meter Using the Energy Economics (EEI)
Proving System
To Next Page
Loading...
Need help?
General
