iTronics ITB-100HD - Configuring User Settings; Driving Mode Settings; Parking Mode Settings

Visit dashcamtalk.com for the latest firmware and owners forum.
How to change the user settings
f P A S S g| BLACK
Setting Driving Mode
Driving Mode •
• FUUHD(1080P) • 24lps
):Bngntness Adlustment: • Standard
):Siiock-Sensi1ivit|<while Driving j • OFF • Insensitive • Normal • Sensitive
Setting Parking Mode
Parking Mode
©[ParkingMode] • Shock Motion Sensing
i|ShockSensiiivit/whiieParking! • Insensitive • Normal • Sensitive
liMotlon Sensitivity Setting Insensitive # Noimal • Sensitive
(T) Exclusive PC Playerversion: Displays the version of exclusive PC player.
(2) Recording Mode: Set the Recording Resolution and number of
recording frames per a second.
® Brightness :Set the brightness of Recording Image.
@ Shock-sensitivity while driving: Set the sensitivity of 3-axis acceleration
sensor while driving. In case of setting to OFF, Event file (E) will not be
recorded while driving and you can not set the ratio of "Event" file (E)
at Deletion by File Type menu.
(§) Speed Display on Image: It will display the speed of vehicle at the time
of recording and you can see the speed when playing the image on
the other media player other than exclusive PC player. Speed display
will be shown at the left upper part of image since after GPS signal is
received and, in case GPS signal is not received in underground parking
lot etc., it will show as"—".
© Parking Mode: Set Auto Parking Mode when parking and also set Event
recording type when setting Auto Parking Mode. In case of setting to
OFF, it will not enter to Parking Mode even while parking and you can
not set the ratio of "Parking"file (P) at Deletion by File Type menu. (Shock
: In case the impact on the vehicle, Motion: Motion is sensed by Camera)
(2) Shock Sensitivity while Parking: Set the sensitivity of 3-axis acceleration
sensor while Parking Mode Recording and, although the setting value
is same as the one of shock sensitivity while driving, shock sensitivity
while parking works much sensitive.
® Setting Motion Sensitivity: Set the motion sensitivity while Parking
Mode Recording.
27