What to do about corrosion or wear on the seal chamber or stuffing-box cover of ITT Water Pump?
To address corrosion or wear on the seal chamber or stuffing-box cover of your ITT Water Pump, replace the seal chamber or stuffing-box cover.
General| Model | 3180 |
|---|---|
| Impeller Type | Closed |
| Discharge Size | 1 to 10 in (25 to 250 mm) |
| Maximum Flow Rate | 6, 000 US GPM (1, 360 m3/hr) |
| Maximum Head | 730 ft (220 m) |
| Horsepower | Up to 500 HP (370 kW) |
| Shaft Seal | Mechanical Seal |
| Connection Size | 1 to 10 in (25 to 250 mm) |
Details critical safety warnings, terminology, and symbols for safe operation.
Provides essential safety rules and precautions for personnel operating the equipment.
Covers essential guidelines and precautions for safe transport and handling of the pump unit.
Provides instructions on proper storage locations and requirements to maintain unit integrity.
Covers essential preliminary steps and guidelines before commencing pump installation.
Details the procedures for correctly mounting the pump baseplate to the foundation.
Explains the critical process of aligning the pump and driver for optimal performance and longevity.
Outlines crucial preparatory tasks and safety warnings before initiating pump startup.
Provides methods and instructions for setting the critical impeller clearance for optimal pump performance.
Describes the requirements and procedures for proper lubrication of pump bearings.
Explains the essential procedures for priming the pump before startup to prevent damage.
Provides step-by-step instructions and precautions for safely starting the pump.
Outlines a schedule for routine, periodic, and annual inspections and maintenance tasks.
Details the procedures for maintaining pump bearings, including lubrication requirements.
Provides detailed instructions and precautions for safely disassembling the pump.
Details the step-by-step procedures for correctly reassembling the pump.
Provides solutions for common operational issues such as no delivery, low head, or noisy operation.
Addresses common problems encountered during pump and driver alignment procedures.
Lists all components of the pump, including part numbers and material codes for identification.
Provides visual exploded views of pump assemblies for component identification and understanding.
Presents certificates confirming compliance with relevant safety and regulatory standards.
Lists contact information for ITT regional offices worldwide for support and inquiries.
To Next Page