Ivy Biomedical Systems 3000 Series User Manual

ECG MONITORING
22 Model 3000 Operation Manual
3. Select [LEAD] to change the lead selection. The current lead selection is shown above the alarm limits in the
upper left portion of the display. Available lead selections are Lead I, Lead II, or Lead III.
4. Press [EXIT] to return to the main menu.
AC Power Filter
Use the following procedure to activate the AC Power filter:
1. Press the [SETUP] key from the main menu.
2. Press the [ECG] key and select the [OPTIONS] key.
3. Select [POWER FILTER] to turn the filter on or off. When the filter is on an indication is shown in the upper
left portion of the display. The filter sets the frequency response of the displayed waveform as follows:
Filtered: 0.2 to 25 Hz
Unfiltered: 0.2 to 45 Hz
4. Press [EXIT] to return to the main menu.
ECG Filter
Use the following procedure to activate the ECG filter:
1. Press the [SETUP] key from the main menu.
2. Press the [ECG] key and select the [OPTIONS] key.
3. Select [ECG FILTER] to turn the filter on or off. When the filter is on an indication is shown in the upper left
portion of the display. The filter sets the frequency response of the displayed waveform as follows:
Filtered: 1.5 to 40 Hz
4. Press [EXIT] to return to the main menu.
HR(BP
M)
HR(BP
M)

Ivy Biomedical Systems 3000 Series Specifications

General

Brand	Ivy Biomedical Systems
Model	3000 Series
Category	Monitor
Language	English