Jackson AVENGER HT-E - Page 30

24
123456789ABCDEFG
123456789A
23:59
Millenium 3
Crouzet
FAHRENHEIT/CELUIS
SELECTl
0=CELSIUS
1=FAHRENHEIT
Millenium 3
Crouzet
1. Line A (inputs) will highlight when the connected component sends a signal to the
PLC. Multiple inputs may be highlighted at the same time.
2. Line C (outputs) will highlight when the PLC closes specic relays. Multiple
outputs may be highlighted at the same time.
1. Line C shows the celsius option.
• Press + or - to highlight line C.
• Press OK to allow display to read temperatures in celsius.
2. Line D shows the fahrenheit option.
• Press + or - to highlight line D.
• Press OK to allow display to read temperatures in fahrenheit.
A
B
C
D
A
B
C
D
PLC TROUBLESHOOTING
MAINTENANCE
24
SCREEN 11:
INPUT/OUTPUT
SCREEN 10:
TEMPERATURE
SELECT
The temperature select screen allows the user to select how temperatures are read,
either in celsius or fahrenheit.
The input/output screen shows inputs and outputs that are active.