07610-003-92-84-Q
20
OPERATING INSTRUCTIONS
OPERATION
8. Verify the nozzles and arms are free from obstruction. If clogged, remove end-
caps, clean nozzles with a brush, and flush with fresh water.
9. Replace end-caps and ensure they have been tightened.
10. Spray or wipe out interior of machine.
11. Replace wash/rinse arms.
12. Ensure sump strainer and scrap screen are clean and securely in place.
13. Use stainless steel polish to clean and protect the outside of the dishmachine.
SHUTDOWN &
CLEANING
To Next Page
Loading...
