07610-003-92-84-Q
21
1. Follow Filling the Wash Tub section.
2. Add deliming solution per chemical supplier’s instructions.
3. Close the door.
4. Flip the NORMAL/DELIME switch on the back of the control box to DELIME.
5. Run machine the period of time recommended by chemical supplier.
6. Wait ve minutes, then inspect the inside of the machine. If the machine is not
delimed, run again.
7. Flip the NORMAL/DELIME switch to NORMAL.
8. Run two cycles to remove residual deliming solution.
9. Drain and re-ll the machine.
CAUTION! This equipment is not recommended for use with deionized water or
other aggressive uids. Use of deionized water or other aggressive uids will
result in corrosion and failure of materials and components. Use of deionized water
or other aggressive uids will void the manufacturer’s warranty.
DELIMING INSTRUCTIONS
OPERATION
DELIMING
!
CAUTION
To Next Page
Loading...
