i
Revision
Letter
Revision
Date
Made by Applicable ECNs Details
A 1-6-14 MHH 8241 Release to production.
B
8-18-14 KAP 8305 Removed pg 17, updated part on page 20.
C 8-29-14 KAP N/A Updated part on pg. 27.
D 10-14-14 KAP N/A
Added 208 volt schematic on page 32.
Updated available electrical characteristics on pg. 4.
Updated Dimensions pg. 1
Updated part on pg. 29
E 4-6-15 KAP N/A Inserted note pertaining to corner installation pg. 2
F 4-16-15 KAP N/A
Updated hood assembly on pg. 20
Added reed swtich
G 8-25-15 KAP N/A
Added Sleeve Hood Spacer to parts breakdown on pg.
20.
H 9-25-15 KAP N/A Inserted High Hood options throughout manual.
J 2-12-16 JH N/A
Added electrical requirements for 208 V machine.
Replaced schematic on pg. 41 with Rev C.
K 3-2-16 JH N/A
Corrected view on pg. 36 to show the gasket on top.
Updated the view on pg. 27 to show the correct valve.
Added Operating Times to pg. 4.
L 11-5-16 JH 8417
Changed timer from 05945-111-35-32 to 05945-004-11-
78.
Audited manual and corrected all incorrect P/Ns.
Complete update of the manual to new format.
M 2-23-17 JH 8503 Changed inlet plumbing and air-gap to 3/4".
N 8-23-17 JH N/A
Updated CAM Timer Operation, Filling the Wash Tub,
and Deliming Instructions to clarify initial ll and ll
adjustments.
Added drain solenoid assembly to pg. 47.
P 12-12-17 JH 8551 Added the XL-E-LTH to the manual.
Q 5-7-18 JH
8604
8628
Added section on connecting heater contactor wires
(LTH only) to pg. 12.
Added item #9a to pgs. 27-28.
Changed quantity of item #8 on pg. 33 to 2.
Changed quantity of item #4 on pg. 50 to 1.
Added item #16 to pgs. 50-51.
Updated pg. 52 to show front dress panel.
Updated schematic on pg. 56.
REVISION HISTORY
To Next Page
Loading...
