Jacobsen GP400 - MACHINE SPECIFICATION

en 18
3 SPECIFICATIONS
3.3 MACHINE SPECIFICATION _____________________________________________
Frame construction: Welded tubular steel chassis.
Cutting unit drive: Direct Drive hydrostatic reel drive pump, bi-directional hydraulic gear motor with reel control
and Backlap valves.
Transmission:Variable displacement hydrostatic pump with low speed high torque wheel motors
Speeds:
Cutting: 0 - 6 km/h (0 - 3.7 mph) Forward
0 - 3 km/h (0 - 1.9 mph) Reverse
Transport: 0 - 12 km/h (0 - 7.5 mph) Forward
0 - 3 km/h (0 - 1.9 mph) Reverse
Steering:Hydrostatic power steering 2.5 turns lock to lock, with 330mm (13 inches) dia steering wheel.
Ground pressure: 1 kg/cm² (14 psi) (Dependent on tyre pressures and accessories fitted)
Brakes: Hydrostatic braking with 152mm (6 inches) Caliper disc parking brakes on front wheels.
Battery:
Yuasa YBX3063 12 Volt 440A 45Ah
TYRE PRESSURE
Product
Front Wheel Rear Wheel
Tyre Size Tyre Type Tyre Pressure Tyre Size Tyre Type Tyre Pressure
GP400 20 x 10.00 - 10 OTR Smooth
0.7 bar
(10 psi)
20 x 10.00 - 10 OTR Smooth
0.7 bar
(10 psi)