en 89
QUALITY OF CUT 11
11.7 CLUMPING _________________________________________________________
“Clumping.” This problem is identified by the appear-
ance of clumps of grass in the discharge area.
Possible Cause Correction
Front edge of deck bulldozing grass between front
castor wheels and anti-scalp rollers.
Move the castor wheels to the outer edges of the deck
and remove anti scalp rollers.
Extreme volume of grass is not discharged quickly
enough from the deck.
Consider using a cut and clear kit
(152cm rotary deck only).
Damaged baffles. Check for damage, repair/replace.
Mowing while grass is very wet. Mow when grass conditions improve.
Grass discharge build up on machine dropping off. Remove grass from machine regularly.
TN1281
To Next Page
Loading...
