Jacuzzi SWIM SPA Series - 3 Delivery and Handling Considerations; Pag

3 Delivery and Handling
Considerations
All Jacuzzi Swim Spas are shipped with a layer of protective foam
[VETTPEWXMG½PQERHGEVHFSEVHJSVEHHIHTVSXIGXMSR
Each Swim Spa is shipped from the factory strapped onto a wood
skid.
The swim spa can then be lifted by a crane into place.
Most installations require the use of a crane. When a crane is
used for lifting, place the straps under the swim spa, ensuring
XLEXXLITPYQFMRKPMRIWERH½XXMRKWEVIRSXWXVIWWIHERHSV
damaged and a spreader is used. The straps should be secured so
that they will not slip in any direction and strap spreaders utilized
to prevent undue structural side load on the swim spa shell.
If you are removing the swim spa using a forklift, please make
sure to use 2.5-3 m (8 – 10 ft.) extended forks and pick up swim
spa at the equipment end.
Warnings!
• Do not move or place the Swimspa on its side.
• Never lift or handle the Swimspa by its plumbing.
4PIEWIIRWYVIPMJXMRKIUYMTQIRXMWWYJ½GMIRXJSVXLINSF1ERYEPP]
lifting of the swim spa should be done with the proper manpow-
er.
• We strongly recommend the installation to be done by a Jacuzzi
Swim Spa Retailer.
10