8
2.4 Wiring Size
The cable cross-section measurements must be chosen according to the system consumption, as well as the cable routes
ERHHMWXERGIWXLIGLSWIRTVSXIGXMZIW]WXIQWERHXLIWTIGM½GWXERHEVHWJSV½\IHIPIGXVMGEPW]WXIQWMRJSVGIMRXLI
country where the Swim Spa is installed.
IMPORTANT NOTE:
This Guide is for standard installations where the wire run is 15 m (50 ft. ) or less. For longer wire runs, consult a
UYEPM½IHIPIGXVMGMER
Power Requirements
.EGY^^MW[MQWTEWEVIHIWMKRIHXSTVSZMHISTXMQYQTIVJSVQERGIERH¾I\MFMPMX]SJYWI[LIRGSRRIGXIHXSXLIMVQE\M-
QYQIPIGXVMGEPWIVZMGI8LI]EVIGSR½KYVIHEXXLIJEGXSV]8LIQSWXGSQQSRIPIGXVMGEPGSRRIGXMSRWEVIPMWXIHFIPS[
Terminal Block Connections
1. Neutral wire connection (blue)
2. Hot wire connection (brown)
3. Bonding Lug / Grounding Terminal
4. 4S[IV[MVIWIRXVERGI)PIGXVMGEP½XXMRK
and conduit must be installed - IPX5 / Ø
34,42 mm)