What to do if my Jade 32J Tanning Beds unit is activated but nothing happens?
If your Jade Tanning Beds unit activates but nothing occurs, first ensure the unit is properly connected to the power source. If it is, try restarting the timer. Also, verify that the unit is plugged in correctly. If problems persist, a certified technician should check the voltage reading.
Why is my Jade Tanning Beds unit too hot?
If your Jade Tanning Beds unit seems too hot, it could be due to a couple of reasons. First, check that the fans are not obstructed by anything, including dust. Second, the room may be too small for the unit; verify that the room size meets the requirements specified in the manual.
What to do if the facial tanner on my Jade Tanning Beds does not light?
If the facial tanner on your Jade Tanning Beds unit isn't lighting, make sure the face tanner switch is in the 'On' position, and then power cycle the unit. If the lamp is defective, replace it. If you've been switching the tanner on and off rapidly, wait a few minutes (approximately 3 minutes) for it to cool down before switching it back on.
How to fix individual lamps that don't light in Jade 32J Tanning Beds?
If individual lamps in your Jade Tanning Beds unit aren't lighting, try the following: 1. Ensure the lamps are properly secured in their sockets by turning each lamp in its socket until it illuminates. 2. Replace any lamps or starters that are defective. 3. If the lamps' lifecycle has ended, replace them.
Why is the room temperature abnormally warm when using Jade 32J?
If the room temperature becomes abnormally warm when using your Jade Tanning Beds unit, it might be because the unit is too close to the wall. Pull the unit away from the wall, leaving at least 10-12 inches of space.
What to do if the canopy of my Jade 32J Tanning Beds does not stay open?
If the canopy of your Jade Tanning Beds unit doesn't stay open, check that the shocks are installed according to the assembly instructions in this manual.
What to do if the acrylic on my Jade 32J Tanning Beds is cracked?
If the acrylic on your Jade Tanning Beds unit is cracked due to damage from user actions or cleaning, you can contact ProSun for a replacement. A non-skilled person can replace the acrylic.
Explains danger and warning symbols for safe operation.
Covers contraindications, limits of application, and essential safety notes.
Details safe transport, delivery, and initial setup requirements.
Provides guidelines for room setup, ventilation, and installation.
Outlines the initial commissioning process by a certified technician.
Explains tanning, skin types, exposure schedules, and factors affecting sensitivity.
Details unit components, optional features, dimensions, and lamp configurations.
Lists electrical specs, noise levels, weight, and operating conditions.
Covers electrical safety precautions and connection requirements for the unit.
Covers compliance with industry standards and electromagnetic compatibility.
Advises on preparations like removing cosmetics, jewelry, and considering medications.
Explains operating modes, control panel functions, and button operations.
Guides users on starting, operating during, and stopping tanning sessions.
Details cleaning procedures for components and the unit after each session.
Lists error messages and common problems with solutions for the unit.
Covers general care, maintenance schedules, component longevity, and replacement.
Lists included parts and provides step-by-step instructions for assembling the unit.
Details warranty terms, coverage, exclusions, and legal provisions.
General| Brand | Jade |
|---|---|
| Model | 32J |
| Category | Tanning Beds |
| Language | English |
To Next Page
