27
MARK76J0002 Rev 3
Electrical Connections
DANGER!
WARNING!
Risk of electrical Shock
To avoid the risk of electrical shock, this equipment must only be connected to a
supply mains with protective earth.
Live Components
Risk of fatal injury due to electrical shock when touching live parts.
Both the power supply and the related connection work must comply with national standards.
The connection work and replacement of the power supply cord must be done by a certied
electrician or technician. For Canada a Class-A ground fault circuit (GFCI) has to be used.
Any equipment outside of the US and Canada needs to comply to their countries standards.
Connection Requirements
There must be an emergency disconnect to turn o the unit in the room.
To Next Page
Loading...
