52
MARK76J0002 Rev 3
Bend back the plastic grey strip
Replacing the Acrylics
1
2
At the end of the
bench or canopy you
will nd an acrylic tool.
Remove it from the
unit and use this to
slide under the acrylic
and lift it up gently.
Acrylic tool
Pull back the acrylic sheet by hand
rst, then use the acrylic tool to
remove the rest of the sheet.
You may want to wear gloves due
to sharp edges of acrylic.
3
Acrylic tool
To Next Page
Loading...
