and the stable symbol appears.
Off: it starts checking weight when the weight and amounts are within the checking range
8) SET07 beep setting: Hi
，
ok
，
Lo
，
out
，
no.beep
Hi: There will be a warning sound when the material quantity is more than the upper limit,
and the weight of the material is more than 20 divisions
Ok: There will be a warning sound when the quantity of the articles is between the upper
and lower limit (including the upper and lower limits).
Lo: There will be a warning sound when the material quantity is less than the lower limit,
and the weight of the material is more than 20 divisions.
Out: There will be a warning sound when the material quantity exceeds the upper and
lower limits, and the weight of the material is more than 20 divisions
no.beep: No sound alarm.
9) SET08 external equipment setting: PC , JMS , Godex , BIRCH, ZEBRA, DMP,
GP, CK , ET , CX, U-KEY.
PC: computer output
JMS: connect with weighing system
GODEX: Godex printer (paper size 5cm*3cm)
BIRCH: Birch printer (paper size 5cm*3cm)
ZEBRA: Zebra printer (paper size 5cm*3cm)
DMP: Dot matrix printer (SH-24)
GP
：
Adhesive label sticker printer (5cm*3cm)
CK: thermal printer (Chinese available)
ET: Large LED display
CX: CX large screen display (version 0.02)
EXCEL: Work with the function of “Use Serial Keys” in Windows in outputting the data to
Excel. Reference user manual: http://www.jadever.com.cn/Download.aspx
U.KEY: U.KEY connector works with PC to send the weighing data to computer
(WinXP/Win7) in form of Excel and so on.
Note: Special setting is needed by distributor if you want to print in Chinese.
10) SET09 baud rate setting: 9600, 4800, 2400
11) SET10 printing modes setting: key, stable, contin
contin：Printing continually
stable：Printing when stable with more than 20d placed on the pan
key：Printing by pressing keys
To Next Page
Loading...
Need help?
General
