Jain Technology XONIC 100L - Separator; Log Interval; Log Time Sync; Log Enable

Xonic 100L, 2021
28
Separator User can select Space, Comma or Tab to separate the data.
Log Interval The Log Interval is the measurement period of time which are taken by the
transducers. Caution) If the flow value changes rapidly, then the log
interval time needs to be rapidly as well.
Log Time Sync
Log Enable User must enable the function for data logger.
RS-232C
1 . CONFIGURE
2 . HEADER
3 . FORMAT
4 . SEPERATOR
5 . LOG INTERVAL
6 . LOG TIME SYNC.
7 . LOG ENABLE
8 . COMM MODE
9 . SELECT COMM
0 . COMM. INFO.
FORMAT
HFTA
H:Header
S:Site name
N:Channel No
D:Date, C:Time
F:Flow, T:Total
I1-I2:AnalogIn1-2
U:Unit, A:Alarm
V:Velocity
RS-232C
1 . CONFIGURE
2 . HEADER
3 . FORMAT
4 . SEPERATOR
5 . LOG INTERVAL
6 . LOG TIME SYNC.
7 . LOG ENABLE
8 . COMM MODE 1 . SPACE
9 . SELECT COMM 2 . COMMA
0 . COMM. INFO. 3 . TAB
SEPERATOR
RS-232C
1 . CONFIGURE 1 . 1 Sec
2 . HEADER 2 . 5 Sec
3 . FORMAT 3 . 30 Sec
4 . SEPERATOR 4 . 1 Min
5 . LOG INTERVAL 5 . 5 Min
6 . LOG TIME SYNC. 6 . 15 Min
7 . LOG ENABLE 7 . 30 Min
8 . COMM MODE 8 . 1 Hour
9 . SELECT COMM 9 . 12 Hour
0 . COMM. INFO. 0 . 24 Hour
LOG INTERVAL
RS-232C
1 . CONFIGURE
2 . HEADER
3 . FORMAT
4 . SEPERATOR
5 . LOG INTERVAL
6 . LOG TIME SYNC.
7 . LOG ENABLE
8 . COMM MODE
9 . SELECT COMM
0 . COMM. INFO.
LOG TIME SYNC.
HH:MM:SS
_ : _ : _