Jain Technology XONIC 100L User Manual

Xonic 100L, 2021
30
Memory of Datalogger
Internal Memory User can see the records of First Log and
Last Logger.
Log Output
Format User can add and list the data here so the data will be download sequentially.
Move cursor by [] [].
Input alphabet characters by [F1].
Delete characters by [CLR].
Leave the edit mode by pressing [ENT].
Log Interval The Log Interval is the measurement period of time which are taken by
the transducers. Caution) If the flow value changes rapidly, then the l
og interval time needs to be rapidly as well.
Log Time Sync
Log Enable User must enable the function for data logger.
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
1 . TIME SET MEMORY 4 . LOG TIME SYNC.
2 . RS-232C 1 . INTERNAL MEMORY 5 . LOG ENABLE LOG OUTPUT
3 . MEMORY 2 . EXTERNAL MEMORY 6 . PORT SELECT 1 . LOG DATE
4 . WAVE DATA 3 . MEM. LOG INFO. 7 . MEMORY CLEAR 2 . LOG OUTPUT
DATALOG
MEMORY
FORMAT
SCFTIVE
MEMORY
1 . LOG OUTPUT F: Flow
2 . FORMAT T: Total
3 . LOG INTERVAL S: Site Name
4 . LOG TIME SYNC. C: Channel No
5 . LOG ENABLE I: Analog Input
6 . PORT SELECT V: Velocity
7 . MEMORY CLEAR E: Error
LOG INTERVAL
1 . 1 Sec
2 . 5 Sec
MEMORY 3 . 30 Sec
1 . LOG OUTPUT 4 . 1 Min
2 . FORMAT 5 . 5 Min
3 . LOG INTERVAL 6 . 15 Min
4 . LOG TIME SYNC. 7 . 30 Min
5 . LOG ENABLE 8 . 1 Hour
6 . PORT SELECT 9 . 12 Hour
7 . MEMORY CLEAR 0 . 24 Hour
MEMORY
1 . LOG OUTPUT
2 . FORMAT
3 . LOG INTERVAL
4 . LOG TIME SYNC.
5 . LOG ENABLE LOG TIME SYNC.
6 . PORT SELECT HH:MM:SS
7 . MEMORY CLEAR _ : _ : _

Jain Technology XONIC 100L Specifications

General

Brand	Jain Technology
Model	XONIC 100L
Category	Measuring Instruments
Language	English